BDCOM P3310 C (4)


OLT with 4 PON ports (1 console port, 1 out-of-band 10/100M port, 4 fixed PON ports (excluding the OLT SFP optical module), 2 gigabit combo ports, 2 gigabit SFP ports, 2 gigabit Base-T ports; AC90-264V single power supply, 19-inch rack-mounted installation, the cooling fan)

More details

1 300,00 лв
1 300,00 лв tax excl.

More info

BDCOM P3310C complies with IEEE802.3ah and P.R.C intercommunication standard, YD/T 1475-2006, supports CTC standard, automatically discovers and cooperates with ONUs of different manufacturers. It can be used for establishing efficient EPON solution.

BDCOM P3310C OLT supports the symmetric uplink/downlink 1.25Gbps PON transmission rate, efficient bandwidth usage and Ethernet services, helping carriers to provide reliable services to their users. Its coupling ratio ups to 1:64, and its support of different hybrid ONU networks minimize the carrier's investment.

BDCOM P3310C, based on the edge-cutting technologies, is strong in functions. A few of its functions such as QoS guarantee, SLA and DBA can be easily listed out.

3 other products in the same category:


System’s capacityMaximum coupling ratio, 1:64 32G backplane bandwidth
6 GE ports (2 gigabit RJ45 ports, 2 combo ports, 2 gigabit optical ports)
4 fixed EPON ports
PON interface
A 1Gbps transmission rate with downlink and uplink symmetry
Average luminous power on the PON port: +2dbm ~ +7dbm
Optical acceptance senitivity of the PON port: not less than -30dBm
Security: ONU authentication mechanism
Network coverage diameter: 30 kilometers
IEEE 802.1D, Spanning Tree
IEEE 802.1w, RSTP
IEEE 802.3ad physical link static/dynamic aggregation (LACP)
Ethernet – II, Ethernet-SNAP
IEEE 802.3ad
VLAN Stacking( Q in Q)
L3 functionsSupporting static route
Backpressure flow control (half duplex)
IEEE 802.3x flow control (full duplex)
IEEE p802.1p, CoS
Supporting the Mark/Remark priority of 802.1P/DSCP
Limiting the uplink/downlink rate based on each ONU
Supporting DBA and SLA
Port-based VLAN
IEEE802.1Q VLAN relay
Supporting QinQ and flexible QinQ
IGMP v1/v2/v3
IGMP Snooping
Multicast VLAN and limited multicast
Unidirectional Link Detection (UDLD)
Hot swap of the EPON optical module on the expanded slot
EAPS fast loopback protection function
Optical path protection of EPON
Network security
Limiting the maximum number of users on each port
Port isolation
Controlling the storm of packets
Flow-based ACL access control function
Transmission data encryption on the PON interface
Configuration management
Various management modes such as CLI, Web, SNMP, TELNET and cluster
RMONv1, group 1, group 2, group 3 and group 9
Upgrading the software and the bootrom through TFTP and FTP
Local or the server’s syslog logs
Command prompt in English or in Chinese
Network testing tools such as ping and traceroute
Debug output
Physical Characters442mm(W) x315mm(D) x 44mm(H)
Installation: A 19-inch cabinet
Weight: 2kg
Environment requirementsWorking condition: 0ᵒC-55ᵒC; 10%-85% no condensation
Storage condition: -40ᵒC -80ᵒC; 5%-95%; no condensation
Power Source
Input voltage: AC100-240V
Input frequency: 47-63Hz
Supporting power input from two power sources
Input current: 1A/230V
Power consumption: Up to 40W