Edge Optical Solutions 10G-SFP-10 SFP+ Module
zoom_out_map
chevron_left chevron_right

local_shipping FREE shipping on orders over BGN120.00

New

Edge Optical Solutions 10G-SFP-10 SFP+ Module

Multi-Vendor MSA Compatible Double Fiber 10G SFP+ Module Tx/RX 1310/ 1310nm, Data Rate 1.25-10.31 Gbps, Max.10km over SMF, 6 dB, Temp. 0-70C

BGN54.00

BGN54.00 Tax excl.
Delivery policy

10G-SFP-10 is Multi-Vendor MSA Compatible SFP+ (Small Form factor Pluggable) Transceiver, operating over Double Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 6 dB, with in most cases is enough to reach about 10 km distance. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This transceiver use top quality DFB Laser transmitter with operating at nominal wavelength 1310 nm. and 1310 nm. PIN Photodiode receiver. It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. 10G-SFP-10 operates in Standard 0°-70°C temperature range and has Double LC interface. SFP+ support 1.25-10.31 Gbps data rate and such applications as 10G Ethernet (10.31Gbps)|Gigabit Ethernet (1.25 Gbps)|STM-64 (9.95Gbps). 10G-SFP-10 SFP+ Double Fiber optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular applications are Internet Service Provider (ISP) Fiber To The Home routing and switching equipment, Mobile operator core and backhaul SDH/SONET applications, Data Center networking for Ethernet connections and other optical links.

Transceiver is CE/RoHS certified and it is Compliant with product safety standards. 10G-SFP-10 SFP+ Transceiver is fully compliant to SFP+ Multi Source Agreement SFF-8431. Consequently, it means that module is compatible with 80% of networking equipment, where is not implemented a special algorithm for protection against third party modules. However – we can provide SFP+ transceiver with custom-encoded firmware in order to make it work almost in any equipment. Therefore, we will be glad to know what your requirement is. Because our focus is providing top quality service, we are performing serious quality checks before delivery of our products. As a result, we do optical parameter measurements, connector cleanness tests and SFP+ transceiver EEPROM memory data validation tests.

10G-SFP-10
1 kg
Data sheet
Media Type
Single-Mode Fiber
TX Wavelength
1310 nm.
RX Wavelength
1310 nm.
Minimum Optical Budget
6 dB
Maximum Distance
10km
Supported Data Rate
1.25-10.31 Gbps
Supported Applications
10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps), STM-64 (9.95Gbps)
DDM/DOM
Supported
Connectors
Double LC
Tx Wavelength Bandwidth
100 nm (1260-1360 nm)
Rx Wavelength Bandwidth
100 nm (1260-1360 nm)
Transmitting Power (Min/Max)
-8/-0.5 dB
Receiver Sensitivity
-14 dBm
Receiver Overload
0.5 dBm
Dispersion
70-100 ps/nm
Chip
MAXIM, MINDSPEED, SEMTECH
Laser
DFB Laser
Receiver Type
PIN
Power
+3.3V single power supply
Compliance
CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, RoHS, SFF-8431, SFP MSA
Temperature Range
Standard 0°-70°C