Edge Optical Solutions BIDI-10G-SFP-10B SFP+ Module
chevron_left chevron_right

local_shipping End users free shipping on orders over BGN120.00

Edge Optical Solutions BIDI-10G-SFP-10B SFP+ Module

Multi-Vendor MSA Compatible BIDI-10G-SFP-10B SFP+ Module


BGN88.00 Tax excl.
Delivery policy

 BIDI-10G-SFP-10B is Multi-Vendor MSA Compatible SFP+ (Small Form factor Pluggable) Transceiver, operating over Single Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 6.2 dB, with in most cases is enough to reach about 10 km distance. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This transceiver use top quality DFB Laser transmitter with operating at nominal wavelength 1330 nm. and 1270 nm. PIN Photodiode receiver. It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. BIDI-10G-SFP-10B operates in Standard 0°-70°C temperature range and has Single LC interface. SFP+ support 1.25-10.31 Gbps data rate and such applications as 10G Ethernet (10.31Gbps)|Gigabit Ethernet (1.25 Gbps)|STM-64 (9.95Gbps). BIDI-10G-SFP-10B SFP+ Single Fiber optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular applications are Internet Service Provider (ISP) Fiber To The Home routing and switching equipment, Mobile operator core and backhaul SDH/SONET applications, Data Center networking for Ethernet connections and other optical links.

    Transceiver is CE/RoHS certified and it is Compliant with product safety standards. BIDI-10G-SFP-10B SFP+ Transceiver is fully compliant to SFP+ Multi Source Agreement SFF-8431. Consequently, it means that module is compatible with 80% of networking equipment, where is not implemented a special algorithm for protection against third party modules. However – we can provide SFP+ transceiver with custom-encoded firmware in order to make it work almost in any equipment. Therefore, we will be glad to know what your requirement is. Because our focus is providing top quality service, we are performing serious quality checks before delivery of our products. As a result, we do optical parameter measurements, connector cleanness tests and SFP+ transceiver EEPROM memory data validation tests.

1 kg
Data sheet
Media Type
Single-Mode Fiber
TX Wavelength
1330 nm.
RX Wavelength
1270 nm.
Minimum Optical Budget
6.2 dB
Maximum Distance
Supported Data Rate
1.25-10.31 Gbps
Supported Applications
10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps), STM-64 (9.95Gbps)
Single LC
Tx Wavelength Bandwidth
40 nm (1310-1350 nm)
Rx Wavelength Bandwidth
40 nm (1250-1290 nm)
Transmitting Power (Min/Max)
-7.8/1 dB
Receiver Sensitivity
-14 dBm
Receiver Overload
0.5 dBm
70-100 ps/nm
DFB Laser
Receiver Type
+3.3V single power supply
CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, RoHS, SFF-8431, SFP MSA
Temperature Range
Standard 0°-70°C