Edge Optical Solutions 10G-SFP-300 SFP+ Module

Data sheet

Media Type	Multi-Mode Fiber (MMF)
TX Wavelength	850 nm.
RX Wavelength	850 nm.
Minimum Optical Budget	4.6 dB
Maximum Distance	300m
Supported Data Rate	1.25-10.31 Gbps
Supported Applications	10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps), STM-64 (9.95Gbps)
DDM/DOM	Supported
Temperature Range	Standard 0°-70°C
Connectors	Double LC
Tx Wavelength Bandwidth	20 nm (840-860 nm)
Rx Wavelength Bandwidth	20 nm (840-860 nm)
Transmitting Power (Min/Max)	-6.5/1 dB
Receiver Sensitivity	-11.1 dBm
Receiver Overload	-1 dBm
Dispersion	110 ps/nm
Chip	MAXIM, MINDSPEED, SEMTECH
Laser	VSCEL Laser
Receiver Type	PIN
Power	+3.3V single power supply
Compliance	CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, RoHS, SFF-8431, SFP MSA

More info

10G-SFP-300 is Multi-Vendor MSA Compatible SFP+ (Small Form factor Pluggable) Transceiver, operating over Double Fiber Multi-Mode Fiber (MMF) optical cable. It has minimum guaranteed optical budget of 4.6 dB, with in most cases is enough to reach about 300 m distance. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This transceiver use top quality VSCEL Laser transmitter with operating at nominal wavelength 850 nm. and 850 nm. PIN Photodiode receiver. It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. 10G-SFP-300 operates in Standard 0°-70°C temperature range and has Double LC interface. SFP+ support 1.25-10.31 Gbps data rate and such applications as 10G Ethernet (10.31Gbps)|Gigabit Ethernet (1.25 Gbps)|STM-64 (9.95Gbps). 10G-SFP-300 SFP+ Double Fiber optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular applications are Internet Service Provider (ISP) Fiber To The Home routing and switching equipment, Mobile operator core and backhaul SDH/SONET applications, Data Center networking for Ethernet connections and other optical links.

Transceiver is CE/RoHS certified and it is Compliant with product safety standards. 10G-SFP-300 SFP+ Transceiver is fully compliant to SFP+ Multi Source Agreement SFF-8431. Consequently, it means that module is compatible with 80% of networking equipment, where is not implemented a special algorithm for protection against third party modules. However – we can provide SFP+ transceiver with custom-encoded firmware in order to make it work almost in any equipment. Therefore, we will be glad to know what your requirement is. Because our focus is providing top quality service, we are performing serious quality checks before delivery of our products. As a result, we do optical parameter measurements, connector cleanness tests and SFP+ transceiver EEPROM memory data validation tests.