MikroTik cAP ac
Dual-band 2.4 / 5GHz wireless access point for mounting on a ceiling or wall with two Gigabit Ethernet ports (one with PoE output) and 802.11ac support.
Description
The cAP ac is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual band wireless radio supports dual chain 2 GHz 802.11b/g/n and 5 GHz in a/n/ас standards, and will provide coverage in 360 degrees around it.
Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables, even if PoE power is required, since the cAP ac supports 802.3af/at PoE input on the first port, and passive PoE output on the second port.
cAP ac (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
Data sheet
Data sheet
- CPU
- IPQ-4018
- CPU core count
- 4
- CPU nominal frequency
- 716 MHz
- Size of RAM
- 128 MB
- Storage size
- 16 MB
- Storage type
- FLASH
- Tested ambient temperature
- -40°C to 50°C
- 10/100/1000 Ethernet ports
- 2
- PoE in
- 802.3af/at
- PoE in input Voltage
- 17-57 V
- PoE out
- Passive PoE up to 57V
- PoE ports
- Ether2
- Number of DC inputs
- 1 (PoE-IN)
- Max power consumption
- 24 W
- Max power consumption without attachments
- 13 W
- Max out per port output (input less than 30 V)
- 500 mA
- Max out per port output (input more than 30 V)
- 400 mA
- Wireless 2.4 GHz Max data rate
- 300 Mbit/s
- Wireless 2.4 GHz number of chains
- 2
- Wireless 2.4 GHz standards
- 802.11b/g/n
- Antenna gain dBi for 2.4 GHz
- 2
- Wireless 2.4 GHz chip model
- IPQ-4018
- Wireless 2.4 GHz generation
- Wi-Fi 4
- Wireless 5 GHz Max data rate
- 867 Mbit/s
- Wireless 5 GHz number of chains
- 2
- Wireless 5 GHz standards
- 802.11a/n/ac
- Antenna gain dBi for 5 GHz
- 2.5
- Wireless 5 GHz generation
- Wi-Fi 5